background image

Yuba Bicycles LLC   

 

  Mundo Cargo Bicycle   [ Owner’s Manual ]        Page 6 

Mis-use of the braking system, 
including over-use of the front brake, 
can cause you to lose control and fall. 
Avoid improper braking by 
understanding and practicing proper 
application of your brakes as 
explained in this manual. 

Contact between your foot or toe-clip 
and the front wheel or fender can 
cause you to lose control and fall. 
Avoid pedaling when turning at slow 
speed. 

A shimmy, or steering wobble, can 
cause you to lose control and fall. If 
you experience a shimmy, slow down 
immediately. Take your bicycle to 
your dealer for inspection and repair. 

7.

 

KNOW HOW THE BICYCLE PERFORMS 

The features of your bicycle, if misused, may cause you to lose 
control of the bike. Before riding fast or in more difficult conditions, 
learn the function and performance of all the mechanisms of your bike 
by riding at slower speeds in a flat, empty parking lot. 
If you want your bicycle to perform differently, or if you have special 
needs that require different parts for the safe operation of your bike, 
consult your bicycle dealer.  
 

Learn the power of your brakes 

The stopping power on bikes varies according to the intended use of the bike. If you would like your bike to 
have more, or less, stopping power, consult your dealer about brake adjustments or other brake options for 
your bicycle. 
 

Avoid toe-clip overlap 

When riding slowly, do not pedal if the handlebar is turned. It may be possible, at very slow speeds, when 
the handlebar is turned, for your foot or toe-clips to contact the front wheel or fender (Figure 1). At normal 
riding speeds, the handlebar does not turn enough for this to occur.  

 

      fig 4- toeclip overlap 

Stop riding if you have frame problems. 

Occasionally riders experience problems with their frame or fork. 
If a frame or fork has any problem, do not ride the bicycle. 
As an example, in very rare cases, some riders may experience 
a “shimmy” or “harmonic oscillation” or “frame vibration” at 
certain speeds. If you are experiencing a shimmy, slow down 
immediately. Take your bicycle directly to a dealer for inspection 
and repair. 
 

Summary of Contents for Mundo Cargo



















Reviews: