3-25
Door and window
1. Cab door
The excavator door is the only path for the driver to
get on or off the machine normally. The door must be
locked when the driver leaves the cab.
Please fasten the door lock on the door latch when
the cab door is open to avoid hurting others. When it
is necessary to close the door, press the door latch
lever to open the door latch, and the cab door can
rotate.
2. Rear window
The rear window can be used as an emergency exit.
When the cab door cannot be opened for some
reason, someone is trapped in the cab and cannot get
on or off normally, and it is necessary to escape from
the cab, please smash the glass by aiming the
pointed cone of escape hammer to the rear window
glass until the glass is broken, and then escape from
it.
3. Front window (flip window)
The driver can get better observation conditions and
air circulation if the flip window is opened.
If you want to open the flip window (front window), you
need to open the handle lock on both sides of the flip
window at first. By operating the handle of the flip
window handle lock, you can slide the flip window up
and down. When the flip window is pulled to a proper
position, you can push the flip window up to the
locked position, and lock the flip window by releasing
the handle lock.
Conversely, the flip window can be lowered.
Door latch
Door latch
pull rod
Lock
Summary of Contents for U35
