22
GoCart200 Omni Service Manual
8.3 Emergency Switch
For ③ EMERGENCY_SWITCH_K22-87R-N29_CSSD maintenance, refer to the following procedures.
1. Remove COVER RIGHT ASSY CSSD or COVER RIGHT ASSY CSSD to unscrew 9 points. (④⑤,
Disassemble Covers for Sensors or Wheels" on page 17
)
2. Remove ③ UNIT_OP_PANEL_ASSY (VIEW “A”) or ④ UNIT_EXT_PANEL_ASSY (VIEW “B”) to unscrew 4
points.
3. Push the side hook like below figure and disconnect cables.
Fig. 14: Emergency Switch
4. Loosen a nut fixed switch in rear of cover.
5. Replace the unit with a new one and assemble in the reverse order of disassembling
8.4 Brake Switch, Soft Switch, Start Switch
For ④ BRAKE SWITCH, SOFT SWITCH, START_SWITCH maintenance, refer to the following procedures.
1. Remove COVER RIGHT ASSY CSSD to unscrew 9 points. (⑤,
"Fig. 9: Disassemble Covers for Sensors or
2. Remove ③ UNIT_OP_PANEL_ASSY (VIEW “A”) to unscrew 4 points.
3. Push the side hook like below figure and disconnect cables.
Fig. 15: Brake Switch, Soft Switch, Start Switch
4. Loosen a nut fixed switch in rear of cover.
5. Replace the unit with a new one and assemble in the reverse order of disassembling
