21
Replacing Sensor
Refer to the type of cables on the front battery.
① Power Cable Connector
② Trigger Wire Harness
(red-yellow)
Not Available.
RS-485 Wire Harness (red-blue)
Type
Description
① Power Cable Connector
For power supply
② Trigger Wire Harness
(red-yellow)
For powering front battery
RS-485 Wire Harness
(red-blue)
Not Available.
Do not connect to robot.
8. Take out by pulling the battery assembly.
9. Insert a new battery in place. It recommends replacing in assembly units.
10. Connect power cable connector and trigger switch cable connector to the new battery then turn on
the trigger switch and main switch.