32
GoCart250 Service Manual
⑨-①, ⑨-②, ⑨-③, ⑨-④, ⑨-⑤
For BRAKE SWITCH, SOFT SWITCH, START_SWITCH maintenance, refer to the
following procedures.
1. Push the side hook as shown in the below figure and disconnect cables.
2. Loosen a nut fixed switch on the rear of the cover.
3. Replace the unit with a new one by following the disassembly steps in reverse order.
Fig. 25: Replacing Switches
⑨-③
MODE_SWITCH_KEY_K22-61K
For MODE_SWITCH_KEY_K22-61K_CSSD maintenance, refer to the following procedures.
1. Loosen a nut fixed switch of the unit_op_panel.
2. Push the side hook as shown in the below Fig. and disconnect cables.
3. Replace the unit with a new one by following the disassembly steps in reverse order.
Fig. 26: Replacing Switch Key