DO NOT RETURN STORE. For questions regarding assembly and use, call Customer Service: 877-441-6999.
Safety Checklist
Before you ride, it is important to carry out the following safety checks:
1. Brakes
Ensure front and rear brakes work properly
Ensure brake shoe pads are not over worn and are correctly
position in relation o the rims.
Ensure brake control cables are lubricated, correctly adjusted
and display no obvious wear.
Ensure brake control levers are lubricated and tightly secured
to the handlebar.
2. Wheel and Tires
Ensure tires are inflated to within the recommended limit as
displayed on the tire sidewall
Ensure tires have tread and have no bulges or excessive wear.
Ensure rims run true and have no obvious wobbles or kinks.
Ensure all wheels spokes are tight and not broken.
Check that axle nuts are tight. If your bicycle is fitted with
quick release axles, make sure locking levers are correctly
tensioned and in the closed position.
3. Steering
Ensure handlebar and stem are correctly adjusted and tightened,
and allow proper steering.
Ensure that the handlebars are set correctly in relation to the
forks and direction of travel.
Check that the headset locking mechanism is properly adjusted
and tightened.
If the bicycles is fitted with handlebar end extensions, ensure
they are properly position and tightened.
