MOUNTING THE BINOCULARS ONTO A TRIPOD
•
During periods of extensive observation in a stationary position, it is recommended to mount
the binoculars onto a tripod. To mount them properly, please use the tripod adapter.
•
Secure the adapter to the tripod.
•
Remove the protective screw from the 1/4” threaded socket (5) in the base of the binoculars.
•
Now, screw in the adapter screw into the binoculars' 1/4” threaded socket. The binoculars
are now securely mounted.
PROPERLY STORING AND CARING FOR YOUR BINOCULARS
•
Aim to keep the lenses free of any dirt accumulation, as much as the conditions allow.
•
Before cleaning the lenses, blow on them to remove sizable particles of sand and dust.
•
When wiping optical surfaces, please use the lens cloth which comes standard with the set.
If a lens cloth cannot be found, you can use any soft, clean fabric (soft cotton cloth, flannel,
silk, or a cotton swab are best).
•
Any grease should be removed with a tissue soaked in rubbing alcohol. In field conditions or
if you do not have rubbing alcohol, breathe right onto the surface of the lens and dry the
condensation off with a soft, clean cloth.
Attention!
•
In order to avoid damaging the lens' coatings, never use paper (dry or wet) to clean the lens
nor apply rubbing alcohol directly onto the lens.
•
To clean the binoculars' exterior, please use a dry tissue. For sheen, apply a few drops of
Vaseline or a similar substance to the tissue.
•
The binoculars are a sensitive optical instrument; do not drop them. Safeguard them from
any other physical damage.
•
Do not subject the binoculars to prolonged exposure to direct sunlight or high temperatures.
•
Do not leave near a heater or heating appliances.
•
When not in use, keep your binoculars in the included carrying case in a warm, dry, and
