Examine the results. If the results are noticeably skewed to one of the sides from the center,
adjust by turning the windage/elevation adjustment knobs RIGHT & UP as needed. Repeat
control shots until the aiming point matches the center of target. Remember: one click equals 20
mm (3/4 inch) at a distance of 100 meters (110 yards).
RETICLE AS A RANGEFINDER
The range finder reticle in your SENTINEL was designed to assist you in determining the range
of your target.
The range can be determined using marks (chevrons) on horizontal line as well as bars on
vertical line of the reticle.
Note: To utilize this feature, the SENTINEL needs to be sighted at 50 meters (55 yards).
HORIZONTAL SCALE
If a 0.5 meter (1.6') wide target fits between the two closest center marks on the horizontal line
of the reticle, the target is 50 meters (55 yards) away.
If the same target fits between the marks located just beneath the horizontal line of the reticle,
the target is 100 meters (110 yards) away.
If the same target fits between the marks located above the horizontal line of the reticle, the
target is 25 meters (27 yards) away. Please see a drawing below.
VERTICAL SCALE
The four short horizontal bars are located on the main vertical line. If a 0.5 meter (1.6') high
target fits between the top marks and the bottom mark right below the horizontal line, the target
is 25 meters (27 yards) away.
The other two horizontal bars on the vertical line correspond to 50 meters (55 yards) and 100
meters (100 yards) accordingly.
Note: If the determined range is 100 meters (110 yards), aim at the center of the target using the
horizontal bar below the center crosshairs.
Note: It is possible to select the color of the reticle of the SENTINEL.
Red is best when used in clear viewing conditions. Green is preferable for use when viewing is
obscured.
