background image

Yunca Multi Warranty Sep 2010  

 

www.yunca.co.nz

  

 

 
 
 
 
 
 
 
 
 
 

 

OPERATION 

 

MAINTENANCE & 

 

WARRANTY INFORMATION 

 

FOR 

 

YUNCA MULTIFUEL BURNERS 

ONLY 

 

SEPTEMBER 2010

 

 
 

THIS APPLIANCE SHOULD BE MAINTAINED AND OPERATED AT ALL 

TIMES IN ACCORDANCE WITH THESE INSTRUCTIONS. 

 

Welcome.  

Congratulations on the purchase of your new Yunca Multifuel burner. 

 

To ensure many years of safe, efficient and trouble free operation, please 

read the following and make sure all members of your home understand 

how this remarkable heater works. 

 

Please fill out and return the registration card promptly. 

 

Remember to put these instructions away in a convenient and safe place 

(with proof of purchase) for ready reference. 

 

If you have any questions, please contact your Yunca agent. 

Summary of Contents for Multifuel burner

Page 1: ...ons on the purchase of your new Yunca Multifuel burner To ensure many years of safe efficient and trouble free operation please read the following and make sure all members of your home understand how this remarkable heater works Please fill out and return the registration card promptly Remember to put these instructions away in a convenient and safe place with proof of purchase for ready referenc...

Page 2: ... more importantly will cause a build up of creosote in the flue creating a fire hazard 3 Denser timbers mean less refuelling and result in greater heat output 4 Larger logs should be split to assist drying and burning 5 YOU MUST AVOID The use of salt borne drift wood The salt absorbed into the wood reacts with the flame and other by products to cause damage to your heater and its components For th...

Page 3: ... build up on door glass Burning wet wood Not enough heat in fire bed before shutting it down Obtain a dryer wood supply or further dry out existing wood Check flue is clean Glass blackening on medium to low heat setting Burning wet wood Not enough heat in fire bed before shutting it down Obtain a dryer wood supply or further dry out existing wood Check flue is clean Heater unable to be turned down...

Page 4: ...to either person s or property The warranty is NOT available if 1 Repair and or replacement of parts assemblies which are necessary due to normal wear and tear such as 1 1 Cladding and body components door and panels enamelling and paintwork brightwork or finishing repairs due to causes beyond the control of the manufacturer or its franchised dealers 1 2 Flues Cleaning of flues removing creosote b...

Reviews: