GIMBAL CAMERA PAN CONTRO
L
There is a gimbal pan mode switch on ST16---S2. When
the switch position is up, the gimbal camera is in Follow
Mode. The pan control of the gimbal camera is now dis-
abled. The gimbal camera will adjust its pan direction ac-
cording to the aircraft’ s movements. When the switch is in
the middle position, the gimbal camera is in Follow Pan
Controllable Mode, the gimbal camera will adjust its pan
direction according to the aircraft’ s movements. Meanwhile, the pan control is ac-
tivated, use the K1 to set the pan position of the gimbal camera. When the switch
position is down, the gimbal camera is in Global Mode. The pan direction of the
gimbal camera will be fixed regardless of the aircraft’ s movements. Use the K1 to
set the pan position of the gimbal camera.
TEAM MODE
GIMBAL CAMERA TILT CONTROL
There is a gimbal tilt mode switch on ST16---S1. When the switch is in up/middle posi-
tion, the CGOET gimbal camera is in Angle Mode. Use the slider (C) on the left side of
the ST16 to set the tilt position of the gimbal camera. When the S1 is in bottom posi-
tion, the gimbal camera is in Velocity Mode. When the Elevator joystick is in the
middle position, it means the velocity rate is 0 for the CGOET, and it will stop tilting
up/down. When the Elevator joystick is above the middle position, the CGOET will
start tilting up. When the Elevator joystick is below the middle position, the CGOET
will start tilting down. The distance between the Elevator joystick and the middle posi-
tion decides the velocity rate, the further distance, the higher velocity it would be.
NOTICE:
Only in the velocity mode, the camera can tilt upwards 15°maximum.
GIMBAL CAMERA PAN CONTROL
There is a gimbal pan mode switch on ST16---S2. When the switch position is up, the
gimbal camera is in Follow Mode. The pan control of the gimbal camera is now dis-
abled. The gimbal camera will adjust its pan direction according to the aircraft’ s
movements. When the switch is in the middle position, the gimbal camera is in Follow
Pan Controllable Mode, the gimbal camera will adjust its pan direction according to
the aircraft’ s movements. Meanwhile, the pan control is activated, use the aileron
joystick to set the pan position of the gimbal camera.
When the switch position is down, the gimbal camera is in Global Mode. The pan
direction of the gimbal camera will be fixed regardless of the aircraft’ s movements.
Use the aileron joystick to set the pan position of the gimbal camera.
13
