background image

collision, fire, explosion, flooding, tsunami, landslide, avalanche, earthquake or other forces of 
nature;

 

Damage and/or injury as well as violation of legal regulations caused by the illegal or immoral use 
of the model, e.g. capturing videos or recording data which infringes upon/harms the privacy of 
other people;

 

Damage and/or injury as well as violation of legal regulations caused by incorrect use of the 
batteries, protection systems, chargers or aircraft;

 

Consequential damage caused by the incorrect operation of any kind of system components and 
accessory parts, especially memory cards, whereby image or video material from the camera can 
become defect;

 

Any non

-

compliance with legal obligations, personal injury, material damage and environmental 

damage caused by use and a failure to comply with the local laws and regulations;

 

Damage and/or injury as well as violation of legal regulations caused by hazardous use without 
sufficient practical experience;

 

Damage and/or injury as well as violation of legal regulations caused by flying in legally defined 
no

-

fly zones.

 

Further losses which do not fall within the scope of use defined by Yuneec as improper.

 

This product is designed for both professional use and personal private use. The national and 
international laws and regulations in force as the time of taking off must be adhered to.

 

 

Collection and Processing of Data

 

Yuneec may collect navigation information such as GPS data to help improve our products.

 

We may also collect Depth Map information and Infrared Image information from your drone 
delivered to our service center for repair and maintenance service or any other service.

 

We may also collect other information such as device information, server log information, etc. 
We may also collect personal information used in registration if you choose to become a 
registered user and any other information user provided to Yuneec. We may also collect 
information which users send to other users, and the recipients and senders of such information.

 

We reserve the right to disclose your information if required to do so by law or in the good

-

faith 

belief that such disclosure is needed to comply with applicable laws, for example in response to a 
court order, judicial subpoena, warrant or request from government, or otherwise cooperating 
with government agencies or law enforcement.

 

We also reserve the right to disclose your information that we believe in good faith is necessary 
or appropriate to: (i) protect ourselves or others from fraudulent, unlawful, or abusive activities; 
(ii) take precautions against potential liability; (iii) protect the security of the Yuneec Apps 
embedded into or downloaded onto your drone or any associated equipment and services; (iv) 
protect the legal rights of ourselves or any others.

 

Any information we collected maybe disclosed or transferred to an acquirer, successor or 
assignee as part of any potential merger, acquisition, debt financing or other activities that 
involves transfer of business assets.

 

We may make the aggregated non

-

personal information of the users available to third parties for 

various purposes, including (i) complying with various report obligations; (ii) marketing efforts; (iii) 
analyzing product safety; (iv) understanding and analyzing our users’ interests, habits, usage 
pattern for certain functionalities, services, content, etc.

 

Summary of Contents for H520E






































Reviews: