YWH100 IP Phone User manual V1.38
Page 15 of 32
③
Set eTalk account
(0117ETNS)
：
press
【
Vol/+
】
to turn over the menu , once is displayed on
the screen, please press
【
Local IP
】
to enter change mode, then you will see a cursor
flashing at the beginning of the second line. It indicates that you can change the setting of
this item. Then press 0117 keys once respectively, 3 key thrice, 8 key twice, 6 key thrice
and 7 key quintic. Then press
【
Spk
】
to confirm. After above operation,
the will be displayed on the LCD
④
Set eTalk pin
(409466193597)
press
【
Vol/+
】
to turn over the menu, once is displayed on
the screen, please press
【
Local IP
】
to enter change mode, then you will see a cursor
flashing at the beginning of the second line. It indicates that you can change the setting of
this item. Then press 409466193597 keys once respectively to input the password, and
then press
【
Spk
】
to confirm. After above operation, will be
displayed on the LCD.
⑤
Save setting and exit setting
continually press
【
Redial
】
to reach save setting menu . Then please
press
【
Spk
】
key to confirm the change. When the menu is displayed on
the LCD, press
【
Spk
】
again to confirm. Once the IP phone restart successfully, the new
setting is effective.
Refer to above operation; you can reach any menu to modify any value. Please refer
to following structure illustrations to learn the values of each menu item. As for the
meaning of each item and value, please refer to
Web Browser Setting
chapter.
(5)Appendix
The following chart indicate the digital
、
letter and mark according to the times
the corresponding character key is pressed in the setting mode.
save
settings
save
Are you sure?
account
account
0117ETNS
pin
pin
409466193597
