PAGE 21
EN
Setting the time
1. Pull the crown out to the 2nd position.
2. Turn the crown to set the hour and minute hands.
3. When the crown is pushed back to the normal position, the small second
hand begins to run.
Setting the date
1. Pull out the crown to the 1st position.
2. Turn the crown counter-clockwise to set the date.
*If the date is set between the hours of around 9:00 PM and 1:00 AM, the
date may not change on the following day.
3. After the date has been set, push the crown back to the normal position.
