YZ Systems Milton Roy • 201 Ivyland Road • Ivyland, Pennsylvania • USA • 18974 • P: 281.362.6500 • www.yzsystems.com
Page 11
NJEX EUR ver. 08-2021
Section 2: System Installation
Figure 9
Figure 10
Expansion
Tank
NJEX Gas
Filter
Bulk Odorant Filter
Actuation Gas Regulator
•
Bulk Odorant Filter,
figure 9,
provides primary
odorant filtration between the storage tank and the
NJEX. The bulk odorant filter is pre-installed inside
the system enclosure attachment to the odorant
source is via a bulk filter manifold equipped with
1/4” FNPT connection located on the back of the
system enclosure.
•
Mechanical Interconnect Cable
,
figure 9,
pro-
vides the connection between the system control
enclosure and the electrical components located in
the mechanical section.
•
Expansion Tank,
figure 10,
provides a closed
loop system for pressure fluctuations within the
Verometer during the odorant fill and injection
cycle.
•
NJEX Gas Filter
,
figure 10,
installed between
the actuation gas regulator and the actuation gas
manifolds provides a 25 micron coalescent filtration
to insure a clean pneumatic supply.
•
Actuation Gas Regulator,
figure 9,
provides addi-
tional regulation of supply gas to actuate the pump.
•
Service Tray,
(Not Illustrated),
should be installed
in the bottom of the system enclosure, to capture
any drops that may occur during servicing of the
odorizer.
Summary of Contents for NJEX 6300G
