Z-CAM E2 Quick Start Manual Download

Page: 4 / 4

3. Select the one you want and press

button to start it. PLEASE WAIT

until the calibration processing is finished and

DO NOT INTERRUPT IT!

Note that the

Sensor Calibration

will take about 2 minutes, and

Hot Pixel

Calibration

will take 5-30 minutes for Z CAM E2 and 5-10 minutes for Z

CAM E2 Flagship series.

4. The camera will reboot automatically after the calibration is finished.

Suggestions

1. For Z CAM E2, if you want to do the camera calibration for WDR mode,

you should run the

Sensor Calibration

for each resolution individually

with WDR mode enabled.

2. If there is new resolution after firmware update, you can run

Sensor

Calibration

for the new resolution.

Summary of Contents for E2

Page 1: ...CAM E2 flagship series from firmware 0 95 Preparation Please follow the instructions below before the camera calibration 1 Connect the camera with power adapter and make sure the power supply will not...

Page 2: ...card or external SSD in the camera 2 Select the maximum resolution and frame rate of the camera as below for different models and press the Record button to start recording Z CAM E2 DCI 4K 120fps Z CA...

Page 3: ...ps 1 Select the resolution you want to run camera calibration you can skip this if use Hot Pixel Calibration option in step 2 2 Come to the camera status MENU System Camera Status and press FN button...

Page 4: ...take 5 30 minutes for Z CAM E2 and 5 10 minutes for Z CAM E2 Flagship series 4 The camera will reboot automatically after the calibration is finished Suggestions 1 For Z CAM E2 if you want to do the c...