Z-CAM ZOLAR Toliman 30C, User Manual

Tip:
If all slaves (without changing the default group ID) are power on at the same time for initial pairing:
10 units: about 48 seconds*
20 units: about 1 minute 52 seconds*
30 units: about 2 minutes 55 seconds*
40 units: about 5 minutes and 10 seconds*
50 units: about 6 minutes*
It is recommended that the number of paired slaves should not exceed 10 at the same time in each round, 
which is more ecient.
If paired, all slaves will power on at the same time to synchronize with the master: within about 2 seconds*
*Varies depending on on-site wireless network signal reception conditions

2. Quick unpairing

    a) Press the Menu Button [28] on the Main Unit Controller [13] of the master to enter the menu list, 

        rotate Rotary Encoder [26], select “ZolarLink” , press it to enter the “ZolarLink” menu, select 

        “Disconnect” , all paired online slaves will automatically cancel the pairing relation-ship with 

        the master, without the need to deal with slaves one by one;

    b) If the master needs to become a slave to join a new network pairing, turn o the power, turn 

        the M-I-S Selector [21] to select the S position, and then follow the "Initial Pairing" process;

    c) If this master needs to return to the idle state, please follow the "Exit ZolarLink" process.

3

. 

ZolarLink Sync Usage Mode (overall situation)

a) Change the relevant color temperature, intensity, light effect and other settings on the master, 

        all the slaves of the same group ID will be automatically synchronized to the same settings;

    b) After synchronization, each slave can be set individually as required, without affecting the 

        original settings of other slaves or masters of the same group ID;

    c) If you want to save all the current settings of the master and slave in the same group ID, the 

        master enters the "ZolarLink" menu, rotate Rotary Encoder [26] to select "Scene", and then 

        select one of 1 to 8 as the scene number, long press Rotary Encoder [26] to save;

    d) If you need to update the scene after the master and slave settings in a group of IDs are 

        changed, you can repeat step c (select the same scene number); if you want to save to 

        another scene number after the settings are changed, you can repeat step c (select another 

        scene number) ;

    e) If the master and slave settings are changed individually in the same group ID, if you want to 

        restore the original saved scene settings, enters the “ZolarLink” menu of the master, rotate 

        Rotary Encoder [26] to select “Scene” , and then select the desired restore Scene number, 

        press the Rotary Encoder [26] , the master and slave will restore the original scene settings;

     f) If a slave wants to exit this group ID without being affected by its synchronization update, 

        enter the “ZolarLink” menu,rotate Rotary Encoder [22] to select “Sync” , press it once, select 

        “Off” , and press it again to confirm, The slave will no longer receive synchronous update 

        commands from the master.

22

Version 1.0.0

ZOLAR™ Toliman 30C User Manual

Copyright © 2022 Shenzhen ImagineVision Technology Ltd. All Rights Reserved