Settings
You can view various information about the current device. Include power voltage, temperature,
device usage, light usage, calibrated, firmware version, and serial number. Check it out as follows:
1. On the standby interface of the Main Unit Controller [16], press the Menu Button [28] to enter the
menu list;
2. Rotate Rotary Encoder [26] to select “Information” , and press it to enter the “Information” menu;
3. Rotate Rotary Encoder [26] to view information such as power voltage, temperature, device
usage, light usage, calibrated, firmware version, and serial number. ;
4. Select Exit or press the Menu Button [28] to exit the Infomation menu.
1. On the standby interface of the Main Unit Controller [16], press the Menu Button [28] to enter the
menu list;
2. Rotate Rotary Encoder [26], select "Settings", and press to enter the "Settings" menu;
3. Rotate Rotary Encoder [26], select “Language” , and press it to enter the “Language” menu;
4. Rotate Rotary Encoder [26], select "Chinese" or "English", and press to confirm;
5. Select Exit or press the Menu Button [28] to exit the "Language" menu.
1. On the standby interface of the Main Unit Controller [16], press the Menu Button [28] to enter the
menu list;
2. Rotate Rotary Encoder [26], select "Settings", and press to enter the "Settings" menu;
3. Rotate Rotary Encoder [26], select “LCD Brightness” , and press it to enter the “LCD Brightness”
menu;
4. Rotate Rotary Encoder [26] clockwise to increase the LCD brightness, each click increases 10%,
highest value is 100%;
5. Rotate Rotary Encoder [26] anti-clockwise to decrease the LCD brightness, each click decreases
10%, lower value is 0%;
6. After selecting, press the Rotary Encoder [26] or the Menu Button [24] to lock the current LCD
brightness;
7. Select Exit or press the Menu Button [28] to exit the Settings menu.
1. On the standby interface of the Main Unit Controller [16], press the Menu Button [28] to enter the
menu list;
2. Rotate Rotary Encoder [26], select "Settings", and press to enter the "Settings" menu;
3. Rotate Rotary Encoder [26], select "LCD Flip", and press to enter the "LCD Flip" menu;
4. Rotate Rotary Encoder [26], select “Normal” or “Flip” ;
5. After selection, press the Rotate Rotary Encoder [26] or the Menu Button [28] to confirm;
6. Select Exit or press the Menu Button [28] to exit the “LCD Flip” menu.
View Information
Language Setting
LCD Brightness Setting
LCD Flip Setting
26
Version 1.0.0
ZOLAR™ Toliman 30C User Manual
Copyright © 2022 Shenzhen ImagineVision Technology Ltd. All Rights Reserved
Summary of Contents for ZOLAR Toliman 30C
Page 1: ...TM Toliman 30C User Manual...