14
Chapter 4
Configuring the WP-520 Settings
This chapter describes the way to set up the WP-520 and the way to check the
hardware and software information.
4.1 Date/Time
The Date/ Time menu allows you to set the WP-520’s date and time settings.
Press left (
Menu
) button,
3 Setup
, and
1 Time/ Date
to enter Time/ Date setup
menu.
Option Description
1 Set Time/Date
You can set the date and time that display on the WP-520
screen.
2 Auto Clock Sync.
The WP-520 can enable or disable to update the time from an
NTP server. After enable this function, input the NTP server IP
address to sync.
3 Set Time Zone
You can set the local time zone.
4.2 Phone Setting
You may configure the basic settings of the WP-520 here. Press left (
Menu
) button,
3
Setup
, and
2 Phone Setting
to configure the basic settings.
There are 1 Language, 2 Caller ID, 3 Phone lock, 4 Backlight, 5 Quick button, 6 FW
update, and 7 Restore factory for configuration.
4.2.1 Language:
You can select language which you want to display. The default language is English.
4.2.2 Phone lock:
If you did not use the WP-520, you may set the idle time to make the WP-520 lock
the keypad. There are off, 15s, 30s, 60s, and 120s for selection. When the WP-520
keypad is locked, press
#
and
left
button to unlock the keypad.
