10
Chapter 3 Configuring your Access Point
with the Web-Based User Interface
3-1 Start-up and Log in
In order to configure the Access Point, you must use your web browser and please do the
following:
1.
Type this Access Point’s address
http://192.168.1.1
in the Location (for IE) or Address field
and press Enter.
2.
Enter the system password (the default setting is “password”).
3.
Click on the “Login” button.
4.
The main page will appear.
After you have logged-in the main page, the Status, System, Wireless Setup, AP Status,
Management buttons will be shown. The main menu provides links to the whole sections of the
web configuration interface.
3-1-1 Status
The Status screen describes the product information briefly. The device status includes
Access
Point Information
,
IP settings
, and
Wireless settings
.