12
3-2 Wireless Setup
3-2-1 Wireless Settings
The Wireless LAN Setup page lets you make changes to the wireless network settings. The Basic
Settings, you can make changes to the wireless network name
Operation Mode, SSID
,
Broadcast SSID
,
Wireless Mode
,
Channel/Frequency
. The Advance Settings, you can make
changes to the other advance settings, such as
Output Power
,
Data Rate
etc.
Basic Settings
Operation Mode:
Selecte the operating mode from the drop-down list. The options are
Access
Point
,
Wireless Client
,
Bridge
,
AP+Repeater.
3-2-1-1 AP Mode
SSID:
The SSID is a unique ID used by Access Points and Stations to identify a wireless LAN.
Wireless clients associating to any Access Point must have the same SSID. The default SSID is
“Wireless”. To change the SSID, type in the SSID you like to use. It is case sensitive and must not
exceed 32 characters.
Hide SSID:
For security concern, you can choose not to broadcast your network’s SSID. To turn
off the broadcast of the SSID, click “No” check box next to
“Broadcast SSID”. And your Access
Point will refuse the connection requests from whose are not aware the Network ID. But certainly
the Access Point can be easily connected well when you realize the Network ID. The default
setting is “Yes”.
