23
Traffic Indicator Maps, and the Traffic Indicator Message (TIM).
Intra-BSS traffic:
Intra-BSS traffic is trffic between wireless stations in the same BSS.
Enable Intra-BSS traffic to allow wireless stations connected to the device to communicate with
each other.
Disable Intra-BSS traffic to only allow wireless stations to communicate with wired network, not
with each other.
DTIM Interval:
This value indicates the interval of the Delivery Traffic Indication Message
(DTIM). A DTIM field is a countdown field informing clients of the next window for listening to
broadcast and multicast messages. When the Access Point has buffered broadcast or multicast
messages for associated clients, it sends the next DTIM with a DTIM Interval value. Clients can
hear the beacons and awaken to receive the broadcast and multicast messages.
WMM:
WMM (Wi-Fi Multi-media) function is to promote wireless Qulity of Service
technology. Enable WMM for Wi-Fi WMM cetificate test.
Number of Wireless Stations Allowed to Associate:
Use this field to set a maximum number of
wireless stations that may connect to the device.
Enter the number (1 to 32) of wireless stations allowed.
Radio Enable:
Turn on the wireless adapter to allow wireless communications between the
device and other IEEE802.11b and IEEE802.11g compliant wireless device. Turn off the wireless
adapter to stop wireless communications between the device and other IEEE802.11b and
IEEE802.11g compliant wireless device.
Output Power Management:
Set the transmit signal strength of the access point. The options are full,
half, quarter, eighth
and min. Decrease the transmit power if necessary. The default is “
full
”.
Date Rate Management:
The basic transfer rates should be set depending on the speed of your
wireless network. Specifies rate of data transmission. Select the desired rate from the drop-down
menu and choose
“Best”
to adapt the rate to the best available.
Preamble Type:
The Preamble defines the length of the PLCP synchronization field for
communication between the Access Point and Network Card. Select the appropriate preamble
type and press the Apply button to set it. The default setting is ‘Dynamic’.
Super-G Mode:
Enable Super-G may enhance the wireless throughput. The default setting is
Disable.
Turbo-G Mode:
Enable Turbo-G may enhance the wireless throughput. The default setting is
Disable.
RTS/CTS Threshold:
RTS Threshold is a mechanism implemented to prevent the “Hidden
