AP Name:
In this field, you may enter any name. This will enable you to manage your AP more
easily if you have multiple Access Points on the network. Besides, Access Point Name
can be
used to prevent you from forgetting an IP Address and fail to access the website. Try to type the
nickname you like to identify the website, then press the button of
“Apply”
to reboot. Whenever
you want to get back to the website again, just type the name you login.
Wireless Mode:
Select the work mode.
AP Mode:
The system can be configured to work as a wireless network access point. Note that
the AP acts only as a layer 2 bridge and does not act as a DHCP server. In other words, it does
not supply dynamic IP addresses and instead relies on the network to supply them.
Station Mode:
When configuring as a station mode, the device is now acting as a wireless
client. The product will associate to an AP within its range in infrastructure mode, or join with
another 5-in-1 device in Client mode in an ad-hoc network.
AP with repeating
: In this mode, you can extend the range of a wireless network. Wireless
clients can associate with the repeater to communicate with each client on your network. Note
that all the Access Points’ IP address must be set in the same network and make sure that Mode,
SSID, Channel and encryption settings are set the same for all of your AP with repeating(s).
Network Type
: There are 2 network types for the wireless station adapter to operate. If you need
to access company network or Internet via Access Point, select “
Infrastructure
”. To set up a
group of wireless stations for files and printer sharing, select “
Ad-Hoc
” (without Access Point).
For
Ad-Hoc
operation, the
same ESSID
is required to set for the wireless stations.
11
Summary of Contents for XG-580 PLUS
Page 1: ...1 FW 4 1 8 0 XG 580 PLUS User s Manual...
Page 15: ...Advanced 15...