Use Manual*1
If any of the above items are not included or damaged, please contact your local dealer for
support.
Mechanical Description
Connect the adapter to your Ethernet-enabled device
A. Combine the antenna with the product to wirelessly connect to the 802.11g networks.
B. Connect one end of an Ethernet cable to the product and connect the other end to the Ethernet
LAN port located on the device (e.g., a gaming console, laptop,desktop computer, or network
printer).
C. Connect the power adapter to product.
The following table provides an overview of each LED activity:
LED Definition
Activity
Description
PWR
Green
Power enabled
Off:
No Wireless LAN
traffic activity
WLAN
Green
On:
Wireless LAN traffic
activity.
Off:
No Ethernet traffic
activity
Flashing:
Wired LAN
traffic activity
LAN
Green
On:
Connect to the
Ethernet.
Default
Press the
“default”
button for about 3 seconds until all LEDs go off. This action will restore to
the factory default settings of the 3-in-1 and enable you to configure the product via web again.
6
Summary of Contents for XG-580 PLUS
Page 1: ...1 FW 4 1 8 0 XG 580 PLUS User s Manual...
Page 15: ...Advanced 15...