Z-EDGE X2, User Manual

8

Loop Recording

With Loop Recording enabled video clips are recorded and saved to the memory card 
in set durations. Once the memory card is full, the Loop Recording feature 
automatically overwrites the earliest unprotected video clip. This prevents long 
duration video clips from being lost in a single overwrite. Set video clip durations 
between Off, 1, 2, 3, 5, or 10 minutes. Video clip duration set inside Setup > 
Cyclic Record

Driving Mode

The X2 Camera can operate like a car dash camera in Driving Mode. The camera will 
automatically power on and begin video recording when connected to power. 
Once disconnected from power it will stop recording and automatically shut down 
after a period of time. If operating as a car dash camera, Driving Mode is best used 
alongside Loop Recording for the most efficient storage of video clips. The feature is 
enabled/disabled inside Setup > Car Mode

PHOTO CAPTURE MODE

Photo Resolution

Set the Photo Resolution of the X2 Camera inside Setup > Image Size

.

Capture Mode

Delay the capture of a single photo by up to 20 seconds after pressing the Shutter 
button. Self-Timer can be set inside Setup > Capture Mode

 Set the quality of the image, select from Fine, Normal, Economy. Image quality 

Quality:
can be set inside 

. 

Setup > Quality

 Set the sharpness of the image, select from Strong, Normal, Soft. 

Sharpness:
Image sharpness can be set inside 

. 

Setup > Quality

 Set the ISO of the camera, select from Auto, 100, or 200. ISO can be set inside 

ISO:

Setup > 

ISO.

 Set the white balance, select from Auto, Daylight, Cloudy, Tungsten, or 

White Balance:
Florescent. Set inside Setup > White Balance