29
*
Simply repeat the above setup procedures to search for the
Device Code for SAT/CBL, DVD or AUX. (Remember to press the
correct Device Mode Key and correct Magic Search Code in step
2-5 above)
IMPORTANT
If the power on/off function of your device is not infra-red
controlled, you need to follow steps 2 to 6 above and start
searching.
Press
and another function key alternately until your
device responds to the expected function, then press the
same Device Mode Key (e.g. TV) to lock in the code.
e.g. Press
&
alternately, or ;
Press
&
alternately.
Notes:
TV, VCR, DVD, CTV and other device codes can be searched
for and locked into any device modes. Simply press the
corresponding device mode key in step 2 & 5 and enter an
appropriate Magic Search Code for your DVD, CTV and other
devices.
Each time you press the
, the HSK-100Z will skip to the
next code and send out a POWER signal trying to turn off your
device.
If you fail to stop pressing
when your device has been
turned off, turn your device on again immediately. Before the
green indicator goes out, press "Mute” on the HSK-100Z to
skip backward. Repeat step 7 above and lock in the code.
If the red indicator flashes six times after your pressing of
key, you are already at the last code of the library.
Press "CH +" and "VOL -" to resume the HSK-100Z and repeat
the above procedures carefully to search again.
