33
4.
Release
(the green indicator flashes twice if the setting is
deactivated).
ADVANCED OPERATION FOR AV EQUIPMENT
Secondary Function
1
Some keys are able to access 2 functions through the use of the
shift key.
2
To use a buttons secondary function, press the shift key then the
next button pressed will perform its secondary function after
which the buttons will return to their primary functions.
3
You can access the shift lock mode by pressing and holding the
shift key for 3 seconds after which all buttons pressed will use
their secondary function. Pressing the shift key again will end the
shift lock mode.
IR Boost Mode
By activating the boost switch in the battery compartment your HSK-
100Z will send out 3 IR beams instead of 1 IR beam. Effectively tripling
the power of your IR signal
Note: The range of your IR beam along with the angles will be
increased but will also consume more power from the batteries.
Restore Factory Settings
1
Hold down "CH+" and "VOL-" keys on the remote simultaneously
for 3 seconds until you the indicator lights up and stays lit.
2
Enter the reset code "9", "9", "9", "9". The indicator light goes out
immediately. All settings are now restored to the factory default
setting.
