Version 0.1
8 June 2011
www.2myhome.eu
class: 0x26 COMMAND_CLASS_SWITCH_MULTILEVEL
The Multilevel Switch Command Class can used to control devices that can be set the a numerical value (most
of the time a percentage). Examples are dimmers are curtain control devices.
class: 0x63 COMMAND_CLASS_USER_CODE
The User Code Command Class is used to control devices that can obtain security codes from the user, using a
keypad or similar input (like the BeNeXt TagReader).
class: 0x86 COMMAND_CLASS_VERSION
The Version Command Class can be used to obtain the version the firmware of a device.
class: 0x84 COMMAND_CLASS_WAKE_UP
The Wake Up Command Class is used to configure devices that can ‘sleep’ (turn of power and RF). The myGate
can set a periodic interval after which the device awakes and send checks if there is any new data available.
Troubleshooting
Frequently Asked Questions
Q
: The
myGate
won’t turn on.
A
:
1
. Please check if the power supply is connected correctly.
2
. Check if the power supply is working.
Q:
The
myGate
has no internet connection.
A:
1.
Please check if the modem/router has internet connection.
Q:
What can I use to control the myGate?
A:
1.
You can use
www.2myhome.eu
website to connect with the
myGate
and control
all devices.
