Version 0.1
8 June 2011
www.2myhome.eu
Delete all Z-Wave network information and create a new network
In order to remove all Z-Wave network information (perform a ‘Controller Reset’), please take the following
actions. Note that this is only possible when the myGate is included in an already existing network. If the
myGate runs its own Z-Wave network, you should exclude the included devices using the 2MyHome Graphical
Web-interface, after which the myGate should be in the same state.
1.
Press and hold the Learn button, the indicator light will switch off.
2.
Once the indicator light starts blinking orange, release the button. The indicator light starts blinking
orange three times every second.
If the indicator light does not blink three times every second, the myGate is not included in a
foreign network. Therefore this functionality is unavailable.
3.
Press the button again. The indicator light will become solid orange for at least a second.
4.
Once the indicator light shows normal behavior again, the myGate has created a new Z-Wave network
and is ready for operation.
