Value
Description
0
Disabled
1
Switch On/Off and Dim (send Basic Set and Switch Multilevel) (Default)
2
Switch On/Off only (send Basic Set)
3
Switch All
4
Send Scenes
5
Send Preconfigured Scenes
6
Control devices in proximity
Typical click timeout (Parameter Number 20, Parameter Size 1) Typical time used to differenciate click, hold
and double clicks
Value
Description
1 — 100 in 10ms units (Default 50)
Send the following Switch All commands (Parameter Number 21, Parameter Size 1)
Value
Description
1
Switch off only (Default)
2
Switch on only
255
Switch all on and off
Invert buttons (Parameter Number 22, Parameter Size 1)
Value Description
0
No (Default)
1
Yes
LED confirmation mode (Parameter Number 24, Parameter Size 1) This allows to save battery
Value
Description
0
No confirmations
1
Confirm button press
2
Confirm button press and delivery (Default)
(c) 2012 Z-Wave Europe GmbH, Goldbachstr. 13, 09337 Hohenstein-Ernstthal, Germany, All rights reserved, www.zwaveeurope.com - pp 9
