Z1 Motorsports EcuTek Getting Started Download

Page: 3 / 7

P a g e

| 3

Revision B

6/30/2022

3. Follow the prompts on screen to either create a new EcuTek cloud account or login to an existing one.

4. Once complete, plug in your Z1 x EcuTek Bluetooth connector

into your car’s OBD2 port. Turn the ignition

key to the ON position but do not start the engine, for push button cars

– press the start button without

depressing the brake pedal.

5. Select

Continue

and follow the prompts on your device to go through the Bluetooth pairing process and

setup a PIN.

6. The setup process is now complete.

Summary of Contents for EcuTek

Page 2: ...Quantity Description 1 1 Z1 by EcuTek Bluetooth Connector GETTING STARTED 1 Install the ECU Connect app on your iOS or Android device 2 Open the app On its first use you will need to select your tuner Type in Z1 in the search bar then select Z1 Motorsports ...

Page 3: ...your Z1 x EcuTek Bluetooth connector into your car s OBD2 port Turn the ignition key to the ON position but do not start the engine for push button cars press the start button without depressing the brake pedal 5 Select Continue and follow the prompts on your device to go through the Bluetooth pairing process and setup a PIN 6 The setup process is now complete ...

Page 5: ...he EcuTek Bluetooth connector is plugged into your vehicle and the ignition is in the ON position 2 Open the My car section of the ECU Connect app and then select the Program ECU option 3 Select which ECU you want to program in this case Engine Then select which ROM file you want to program ...

Page 6: ... 6 30 2022 AB 4 Select Program and then Start Test to begin the communication test This will take 5 minutes to complete then select Continue 5 Now it is time to flash the ECU select Program once again to begin the process ...