DOC-USR-0113-01
___________________________________________________________________________________________
23
9.0
SUMMARY OF OPTIONS
This section lists the different options that are available in the various menus and tabs for configuration of
your decoder.
The System Setup Tab
9.1
Parameter
Options (default in bold)
Notes
Local IP Setup
Local IP Address
192.168.x.y
(192.168.0.120)
Sets the IP address of the unit. Note that a “save”
of these settings and a reboot is needed for
changes to this value to take effect.
When in DHCP mode, this field is not applicable.
Local Netmask
255.255.z.w (
255.255.0.0
)
Sets the netmask of the unit. Note that a “save” of
these settings and a reboot is needed for changes
to this value to take effect.
When in DHCP mode, this field is not applicable.
Default Gateway 192.168.a.b (
192.168.0.1
)
Sets the network gateway to use for the unit. Note
that a “save” of these settings and a reboot is
needed for changes to this value to take effect.
When in DHCP mode, this field is not applicable.
DNS Server IP 1
a.b.c.d (
8.8.8.8
)
Used to specify the DNS server for hostname lookup
when in static IP mode. When in DHCP mode, DNS
information is acquired from the DHCP server and
this field is not applicable.
DNS Server IP 2
e.f.g.h (
8.8.4.4
)
Used to specify the secondary DNS server for
hostname lookup when in static IP mode. When in
DHCP mode, DNS information is acquired from the
DHCP server and this field is not applicable.
Use DHCP
Checked
Unchecked
Sets whether DHCP is used to dynamically obtain an
IP address at start up.
Device Setup
Auto Start
Checked
Unchecked
Sets whether the unit will automatically start
encoding upon detection of video input.
