CONFIDENTIAL
DOC-USR-0061-01
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
45
Audio Info (Entries for each of the 4 subchannels within the source)
Enable
yes (for Sub Channel 1)
no
Used to select which subchannel should be
used for the audio source. Only one
subchannel can be enabled.
Codec
ARM AACLC
ARM AACHE
The codec to use for audio.
Sample Rate
48KHz
The sample rate of the audio.
Bit Rate
12Kbps – 320Kbps (
128Kbps
)
The bit rate of the audio.
Mode
Mono
Stereo
Select between stereo and mono inputs.
Source
HD-SDI
HDMI
Analog
None
Where to get audio for that subchannel.
Pid
0 – 8191 (
120,121,122,123
)
If UDP format is selected, the PID to use for
that audio channel.
RTP Port
0 – 9999
(8892 – 8898)
If RTP format is selected, the port #
associated with that audio channel.
Output Format
RTP
UDP
RTMP
TSFILE
FILE
MPTS
Output format of encoded stream.
RTP requires an SDP file for the receiver or
the use of the RTSP URL (see Section 6.6,
“Streaming RTP” on page 17 for more
details).
If UDP is selected, don’t forget to check the
value of TS Rate to make sure it is in line
with expectation.
See Section 7.0, “STREAMING RTMP IN THREE
DIFFERENT RESOLUTIONS” on page 31 for
more on using the RTMP format.
TSFILE will write audio and video to a TS file.
If this is selected, you should type the