DOC-USR-0112-02
___________________________________________________________________________________________
18
7.0
PERFORMING OTHER OPERATIONS WITH THE DME-10J
Saving Current Settings
7.1
If you have a specific configuration you’d like to preserve, you can save it so that when the encoder is
powered off and back on, it automatically uses those settings.
In the “preset” dropdown menu located at the bottom of any screen, select “--- new preset ---“.
(1)
A text will appear. Enter your desired preset name. In the pictured example, “z3_config1” is used.
(2)
Click “ok”.
(3)
Select your newly created configuration from the preset dropdown menu at the bottom of the
(4)
screen.
As soon as you select a new preset, the screen will reload.
(5)
Change your desired settings.
(6)
Once your changes have been set in this configuration, click on the “Save” button.
(7)
Figure 10 Creating a New User Preset Configuration
Select “--- new preset ---”
(1) Type New Preset Name
(2) Click “ok”
Figure 11 Entering a User Preset Name
Click “Save”
Figure 12 Saving a User Preset
