CONFIDENTIAL
DOC-USR-0030-12
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
32
7.12
Running DHCP
The Z3-DM8107-SDI-RPS supports DHCP. When DHCP is enabled, the Z3-DM8107-SDI-RPS dynamically
receives an IP address to use at startup. The IP address that is assigned can be seen either through the
serial interface or through the ZFinder tool running on a PC. To see how DHCP support works, you can
do the following steps:
(30)
The first thing you need to do is set up a custom configuration so that the DHCP setting is used
the next time the system boots up. To do this, click on the “User Presets” tab and click on
“new”:
(31)
This brings up a new text box to enter the preset name. Type “z3_test” and click “ok”:
Figure 21 The User Presets Tab
Figure 22 Entering a User Preset Name
(1) Click here to select “User Presets”
(2) Click here to set a new preset
