DOC-USR-00XX-0X
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
22
(26)
Once you select UDP, “TS RATE” should appear with the default value of 10000K. Change this to
1000K (see step 5 in the figure above).
(27)
Click on “start” to start encoding (see step 6 in the figure above).
(28)
Open VLC to view your UDP stream (see Section 6.4 on how to do this) and view the “Statistics” tab
(see Section 6.6). You will see a lower value for the overall input rate and for the “content” rate:
The value of TS Rate must be higher than (video b audio bit rate) * 1.25. If an attempt is made
to input a value less than this, the error message “TS rate too small to carry elementary streams” will
appear.
Input bitrate lowered to 1Mbps
Figure 20 TS Rate and Lower Bit Rate Reflected in VLC
Content bitrate lowered to ~ 512K + 128K
