DOC-USR-00XX-0X
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
51
11.3
The Status Tab
Note: May take a few seconds to load after being clicked
Output Value
Explanation
Video Status
CH
The channel number (1 or 2)
Bit rate
Current target bit rate of encoder
Actual Bit rate
Actual bit rate being output by encoder
FPS
Current target frames per second of encoder
Actual FPS
Actual frames per second being encoded
Key-frame FPS
# of key-frames per second (for example, a value of 0.5 means a key frame is
inserted every two seconds)
Width
Width of encoded picture
Height
Height of encoded picture. A small “i” will appear if interlaced is being encoded.
Audio Status
Channel
The channel number (1 or 2)
Subchannel
Always 1 in this release
Codec
The codec being used to encode audio for that channel
Stream Status
Channel
The channel number (1 or 2)
URL
URL the channel is being streamed to
frames
# of frames sent from encoder to channel since the beginning of encoding. This
can serve as a quick sanity check (for example, you can click “Refresh”, count to
10, click “Refresh” again, and you should see an increase of around 600 for 60
frames per second content).
Input Status
Input
Input type
Resolution
Capture resolution for that input
FPS
Capture frames per second for that input
Refresh
Refresh the current status values.
Auto Refresh
If checked, causes the values in the status tab to be refreshed automatically once
every five seconds.
