DOC-USR-00XX-0X
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
53
11.5
The CH1 Tab (Encode)
Parameter
Options (default in bold)
Notes
Video Source
HDMI1
Component1
(SDI on CH2)
Where to get input for channel 1. If SDI input
is desired, CH2 should be used.
16:9
Checked
Unchecked
For any SD resolutions (NTSC, PAL), checking
this forces the aspect ratio to be “16:9” in
the output (otherwise a default value of 4:3
is used). This value is ignored for HD
resolutions.
Video Resolution
176x144 –
1920x1080
Follow Input
The encode resolution for channel 1. If this
resolution is different from the capture
resolution, resizing will occur. “Follow Input”
generates the resolution based on the
capture resolution (see Note 1 for resolutions
supported).
Video Bit Rate
100 – 12000K (
6000K
)
The bit rate for channel 1.
Video Profile
High
Main
Baseline
The H.264 profile of the bitstream. Generally
High is used for 1080p, Main for D1, and
Baseline for < D1.
Frame Rate Divider
1
, 2, 4, 6
Used to encode at less than the input frame
rate (for example, an input frame rate of
30fps with a divider of 2 would cause an
output stream of 15fps). If interlaced input is
used then this is used to reduce the number
of fields being encoded (see Note 2).
Number of B-frames
0
– 2 (
0
)
The number of B-frames. A value of “0”
means B-frames are disabled.
Interlace Mode
Follow Input
Progressive
Progressive HQ
Interlace
This allows the user to specially handle
interlaced input. “Follow input” is the
default option – it will leave interlaced input
as is.
“Progressive” will convert the interlaced
