DOC-USR-00XX-0X
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
8
2.0
QUICK START GUIDE
2.1
If You Have Received a System from Z3 with the Software Preloaded
To start working with the encoder, you can go straight to Section 6.0, “GETTING STARTED WITH THE MVE-
100R,” on page 11. This section describes how to quickly generate a UDP or RTP stream to VLC, how to
change bitrate dynamically, how to adjust the UDP TS rate, tuning for latency, and using DHCP. Details
on encoding to ASI or RTMP can be found in the follow-up sections on pages 32 and 36. Details on
running the Decoder can be found in Section 9.0, “RUNNING THE DECODER”, on page 39.
2.2
If You Already have a System from Z3 and Need to Update the Firmware
You can update the firmware via the web GUI interface by following the instructions in Section 10.2:
“Making a Firmware Update”, on page 42.
