Z3-MVPR-01 V1.06.07b
_______________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
15
5.6 Streaming RTP
Once you have UDP streaming running, it is relatively simple to change to RTP streaming. All that
is needed are a change of settings and an SDP file (an example file is provided with the software
release from Z3). To stream using RTP, do the following steps:
(17) Click on “Stop Encoder” to stop the current encoding session.
(18) Make sure “Output Interface” is “Ethernet (VBR)” (see
Figure 10
).
(19) Change “Output Format” from “MPEG-2 TS” to “RTP” (see
Figure 10
)
(Note: Do
not
select
“MPEG-TS over RTP”).
(20) Confirm that “Dest Port” (
Figure 10
) is 8888 (this will be important for the VLC configuration).
(21) Copy the “z3-dm368.sdp” file received from Z3 to your PC.
(22) Open VLC. Select “Media – Open File” and select the “z3-dm368.sdp” file you just copied.
(23) You should then see RTP video streaming on VLC:
Figure 14 Example of Z3 Video Streaming to VLC (RTP)
