39
CONFIDENTIAL
DOC-USR-0239-04
____________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
13.21
Encoding with Forward Error Correction
13.21.1
Zixi Feeder
TM
Enabled
The Z3-Q603-RPS is Zixi Feeder
TM
enabled. A compatible decoder with Zixi Receiver
TM
integration is
required to run this feature.
(1)
Verify your Zixi Receiver
TM
device is running or your encoded stream will fail to start.
(2)
Return to the user interface.
(3)
If necessary, click on the “
Stop
” button in the “
Channel Controls
” section of the user interface CH1
tab or the “
Stop All
” button in the lower right corner of the screen of any tab.
(4)
Set “Output Format” to “ZIXI”.
(5)
Set the “Dest Address” to “address:port/streamid” where:
(a)
“address” is the IP address of t
he decoder
(b)
“port” is the port of the decoder
(c)
“streamid” is any stream ID or name you select (for example, 192.168.0.6:2088/z3)
(6)
The Zixi percent overhead can be adjusted by entering a number between 1 and 100 in the “Zixi
Overhead” textbox
.
(7)
If log in creden
tials are desired, select “True” in the “Zixi Auth Enable” dropdown menu and enter
your valid information.
(8)
Click the “Start” button
.
Figure 32 Enabling Zixi Feeder
TM
Encode
(1) Change to
“ZIXI”
(
5) Click “Start”
(
4) Select “True”
and enter valid
credentials
(2) Set to
“address:port/streamid”
(3) Set between
1 and 100
