55
CONFIDENTIAL
DOC-USR-0239-04
____________________________________________________________________________________
Z3 Technology, LLC
♦
100 N. 8th St. STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
16.2
The User Presets Tab
Button
Notes
new
Define a new configuration file.
Up to nine configurations can be created.
rename
Rename a configuration file.
delete
Delete a configuration file.
export
Export current settings to a file.
import
Load settings from a previously exported file.
reset
Resets presets
16.3
The Status Tab
*Note:
May take a few seconds to load after being clicked
Output Value
Explanation
Video Status
CH
The channel number (1 - 3)
Bitrate (Kbps)
Current target bitrate of encoder
Actual Bitrate
Actual bitrate being output by encoder
FPS
Current target frames per second of encoder
Actual FPS
Actual frames per second being encoded
Key-frame FPS
# of key-frames per second (for example, a value of 0.5 means a key frame
is inserted every two seconds)
Width
Width of encoded picture
Height
Height of encoded picture. A small “i” will appear if interlaced is being
encoded.
Audio Status
Channel
The channel number (1 - 3)
Subchannel
Always 1 in this release
Codec
The codec being used to encode audio for that channel
Stream Status
channel
The channel number (1 - 3)
URL
URL the channel is being streamed to
frames
# of frames sent from encoder to channel since the beginning of
encoding. This can serve as a quick sanity check. (For example, you can
click “Refresh”, count to 10, click “Refresh” again, and you should see an
increase of around 600 for 60 frames per second content).
Input Status
Input
HDMI1 refers to the captured content from the camera lens
Resolution
Capture resolution for that input
FPS
Capture frames per second for that input
