background image

 

  

 

 

DOC-USR-0135-01

 

 
 

___________________________________________________________________________________________

 

Z3 Technology, LLC 

 100 N 8

th

 ST, STE 250 

 Lincoln, NE 68508-1369 USA 

 +1.402.323.0702

 

22

 

6.8.2

 

Stream RTMP to YouTube Live

 

 

(1)

 

If you have not already done so, verify you have set up a YouTube live account and access your 

YouTube live dashboard. (As of the date of this document, the dashboard URL is: 
https://www.youtube.com/live_dashboard)

 

(2)

 

Under Encoder Setup, locate your “Server URL” and “Stream name/key”.

 

 

 
 

 

(3)

 

Return to the encoder user interface CH1 tab and click on “stop” to stop the current encoding 

session.

 

(4)

 

Set “Output Format” to “RTMP”.

 

(5)

 

For “Dest Address”, type “{server_url}/{stream_key}”, 

 

(a)

 

{server_url} will be the value specified in your YouTube Live dashboard. Omit the RTMP protocol 
“rtmp://” and enter “a.rtmp.youtube.com/live2”.

 

(b)

 

{stream_key} will be the value specified in your YouTube Live dashboard.

 

(6)

 

It is recommended to set “Video Rate Control” to “CBR”.

 

(7)

 

It is recommended to set “GOP Size” to:

 

(a)

 

120 Frames – 240 Frames for 60 fps content.

 

(b)

 

60 Frames – 120 Frames for 30 fps content.

 

(8)

 

Consult the YouTube live stream setup documentation available in YouTube’s online Live Streaming 

Guide for recommended bitrates for your resolution.

 

 

 

Figure 17  YouTube Live Dashboard – Encoder Setup

 

Summary of Contents for Z3-SBE264-10




































































Reviews: