background image

SAFETY INSTRUCTIONS

Please read carefully prior to using this product.

You should consult a physician before beginning any exercise program  this is especially 
important if you are pregnant, sick injured or have a pre-existing medical condition.

If whilst using the treadmill you feel dizzy, faint, short of breath or any pain STOP using the 
treadmill immediately and consult a physician.

When using electrical products, you should follow normal safety procedures, especially 
if there are children or pets around.

1

2

Avoid placing the treadmill on thick carpet – it should be placed on a 

-

heating the motor.

3

To fold and unfold the treadmill, refer to the 

Folding Instructions

 section 

below.

4

To turn on the treadmill, connect the power cord to the wall and turn on 

the red 

switch at the back of the treadmill and avoid sharing the 

power outlet with other electrical products.

5

Grounding electrical equipment is important and reduces the risk of 

electrical shock.  The electrical cord and plug provided with the tread-

mill are grounded therefore a grounded power outlet must be used to 

avoid injury. 

6

Always check the running belt alignment each time you use the treadmill - 

the running belt will move to one side with use – to align the running belt 

correctly and tighten it when it becomes sticky under foot and loose, refer 

to the 

Belt Alignment

 section below

 It’s important you do this correctly to avoid injury.

7

To start the treadmill, place the 

safety key

 on the yellow circle on the 

Control Pad and attach the clip to your clothing.  

Note

, the treadmill will 

not start unless you do this.

Summary of Contents for TX-1000

















Reviews: