12
this call earlier, just hang it up. By alarm or emergency call, only one person can tap at one moment, the
next person has to wait till the previous person stops tapping (Mini Alarm calls on telephone numbers in
the order in which they were added to the address book).
C. PANIC mode (emergency call)
PANIC mode is a mode in which the user has the possibility to call for help by pressing the button in case
of danger or health problems. Mini Alarm sends a text message and calls on all telephone numbers
defined in the address book to inform your family or friends that you are in danger.
You have to allow the PANIC function by sending a text message in form: password P=ON (e.g.
abcd_P=ON
) on telephone number of Mini Alarm. Then you can activate / disactivate the function by
pressing the button three times. When PANIC mode is active, green LED light shines permanently. If you
want to prohibit this mode (so that you can´t activate it by pressing the button), send a text message in
form: password P=OFF (e.g.
abcd_P=OFF
) on telephone number of Mini Alarm.
If Mini Alarm is set on PANIC mode and user wants to call for help, he/she has to press the button once
(any other than 3-times-pressing causes an emergency call). Green LED light starts flashing quickly – it
means that Mini Alarm sends text messages with text
Mini Alarm DRAGON PANIC
and calls on all
telephone numbers in the address book. You can change the text of this message (see page 8). You can´t
change Mini Alarm´s mode when it is sending text messages and emergency calls, you have to wait untill
the device ends all actions. After sending text messages and calls Mini Alarm stays in PANIC mode. You
can turn it from PANIC mode to Alarm mode on distance by sending a text message, e.g.
abcd_ARM=ON
or
abcd_ARM=OFF
), but you can´t turn it from armed status to PANIC mode.
Advice: When you are not in the protected room, you can use Mini Alarm as an alarm, when you are in the
room, you can use it as a PANIC button. Don´t forget to change the mode of device every time you leave.
VI. EXTERNAL INPUT
It is possible to connect an external sensor to the input situated on the back side of the device (see page 4
Device description). You can use the external input in several ways, but first you have to set it up:
Password_EXT=ARM
Arming input (leaving button), you can arm by pressing it.
Password _EXT=PANIC
PANIC button, after pressing it Mini Alarm sends text messages and
emergency calls immidiately, it is not necessary to turn to PANIC mode.
Password _EXT=PIR
Detector, for the case you need more sensors.
Password_EXT=BUTTON
Control button, you can manage the device from other place in the room, not
necessary to press the button on the top of DRAGON.
For disactivation, send a text message in form: Password_EXT=OFF (e.g.
abcd_EXT=OFF
).
VII. EXTERNAL OUTPUT
It is possible to connect external siren to the input situated on the back side of the device (see page 4
Device description). Connector for input and output is the same, but it is necessary to set it up before
connecting the connector of siren. You can set it up by sending text message in form:
Password_EXT=OUT (e.g. abcd_EXT=OUT)
