9
? / $
- question mark or dollar sign at the end of a text message means that you want Mini
Alarm to confirm you the execution of your command by a confirmation text message
sent on your mobile phone. Question mark is for telephone numbers and status of device,
dollar for text messages.
Manufacturer recommends to send text messages with question mark at the end so that you can be sure
that you changed the settings or did a command correctly. After sending this message to Mini Alarm, you
will receive an information not only about the settings, but also about battery status and device´s mode (at
the end of the message), it means if it is armed or disarmed or if it is in PANIC mode, e.g.:
abcd T1= 09xxxxxxxx T2=# T3=# T4=# O=10 L=5 P=ON PWR=ON ARM OFF
or
abcd T1= 09xxxxxxxx T2=# T3=# T4=# O=10 L=5 P=ON BAT=75% ARM ON
* PWR=ON
- adapter is connected
* BAT=25%
- battery is charged on 25%
- possible status: BAT=25%, BAT=50%, BAT=75%, BAT=100%
* ARM ON
- armed
* ARM OFF
- disarmed
* PANIC
- in PANIC mode
If you don´t want Mini Alarm to send you text messages by alarm or emergency (you want to receive just
calls), send a configuration text message in this form: password_S1=#_S2=#_S3=#_S4=#_S5=#. For
settings confirmation, a dollar sign $ at the end, e.g.:
abcd_S1=#_S2=#_S3=#_S4=#_S5=#_$
.
If you want
to cancell sending just some of information messages, send a configuration message with number of that
message. E.g.: if you don´t want to receive information about low battery, send a message in this form:
abcd
_
S3=#.
Examples of configuration and command text messages:
Changing password from “abcd” to “klmn”.
abcd_H=klmn
Setting up telephone number 1 (valid for T2, T3, T4 as well).
abcd_T1=09xxxxxxxx
Deleting telephone number 1 from adress book of Mini Alarm (valid
for T2, T3, T4 as well).
abcd_T1=#
Leaving time set on 15 seconds.
abcd_O=15
Tapping time by alarm or emergency call set on 5 minutes.
abcd_L=5
Permission for PANIC mode.
abcd_P=ON
Prohibition for PANIC mode.
abcd_P=OFF
Changing the name of device/object.
abcd_S0=FLAT#
Changing the text of information message from the original to
„warning“ (valid for S2, S3, S4, S5 as well)
abcd_S1=warning#
Cancellation of sending text messages.
abcd_S1=#_S2=#_S3=#_S4=#_S5=#
Checking settings of phone numbers and parametres.
abcd_?
Checking settings of text messages.
abcd_$
Arming.
abcd_ARM=ON
Disarming.
abcd_ARM=OFF
External arming input.
abcd_EXT=ARM
External PANIC button.
abcd_EXT=PANIK
External motion detector.
abcd_EXT=PIR
External control button.
abcd_EXT=BUTTON
No external input.
abcd_EXT=OFF
You can combine the messages and set more parametres in one message.
