background image

Getting the Best Fit

To get the best sound out of your earbud,  
you need to have the right size ear tip to form 
a good seal. That’s why we provide different-
sized tips.

If your ear tip feels loose, try a larger size.  
If you feel too much pressure, or if the ear tip 
doesn’t fit inside your ear, try a size smaller. 

Note: each of your ears may require a 
different-sized tip. 

To see if you’ve got a good seal, try the yawn 
test. Put in your earbuds and give a nice 
yawn; if your earbuds don’t wiggle and don’t 
break the seal, then you’ve got a good fit.

Charging the Wireless Earbuds

The case carries enough power to charge the 
earbuds up to 4 times

*

.

1.  Place the earbuds in the charging case. 

You’ll feel them magnetically click into 
place.

2.  A red light on the earbuds will indicate 

charging.

Charging the Case

Your case comes charged and ready to go. 
You can re-charge the case wirelessly using 
a wireless charging pad, or charge the case 
manually using the included USB-C

®

 cable.

Wireless Charging

1.  Simply drop the charging case on a 

compatible wireless charging pad.

2.  The Battery Indicator lights on the front of 

the case will flash according to its current 
battery level. This indicates your case is 
charging. When the case is fully charged, 
all four lights will turn off.

Manual Charging

1.  Connect the included USB-C charging 

cable to the port on the side of your case.

2.  Connect the USB-A end of the cable to 

your preferred 5V USB outlet.

3.  The Battery Indicator light will flash 

according to its current battery level. This 
indicates your case is charging. When the 
case is fully charged, all four lights will 
illuminate and then turn off.

4.  Disconnect the charging cable.

Warranty information available at www.zagg.com/warranty-policies

©2020 ZAGG Inc All Rights Reserved 

|

 NASDAQ: ZAGG 

|

 MADE IN CHINA

The Bluetooth

®

 word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by ZAGG Inc is under license.  

USB-C is a trademark of USB Implementers Forum.
Other trademarks are property of ZAGG.
*All hours usage and charging claims are estimates based on internal testing and will vary based on individual usage.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any 
interference received, including interference that may cause undesired operation.

THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS 
OR CHANGE TO THIS EQUIPMENT. SUCH MODIFICATIONS OR CHANGE COULD VOID THE USER’S AUTHORITY TO OPERATE THE 
EQUIPMENT.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These 
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses 
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to 
radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause 
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to 
try to correct the interference by one or more of the following measures:

-  Reorient or relocate the receiving antenna.  
-  Increase the separation between the equipment and receiver. 
-  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 
-  Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific 
operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other 
antenna or transmitter. 

314-00849 | 07/15/20

Drivers:

 6mm   

Resistance:

 16 Ohms ± 15%  

Sensitivity:

 100dB ± 3dB   

Frequency:

 50Hz - 20KHz   

Working Time:

 5+20hrs   

Charging Time:

 1.5-2h

Introduction

Welcome to truly wireless audio with 25 hours

*

 of 

combined battery life and wireless charging case.

Touch Controls

Simple Pairing

Remove earbuds from case and 
remove protective cover from 
contacts. Place earbuds in charging 
case and allow 5 minutes to charge.

Open case and remove earbuds to 
initiate Bluetooth

®

 pairing.

On your device’s Bluetooth menu, 
select “IFROGZ Airtime Pro 2 SE.”

Long hold

3x Taps 

(Voice Assistant)

Quick tap

L

R

Using the Earbuds

Airtime Pro 2 SE true wireless earbuds have 
built-in touch navigational controls. Just tap 
on the end of the earbud (on the IFROGZ 
logo) to navigate.

Turning Earbuds On/Off

To turn the earbuds on, simply remove the 
buds from the case. To turn the earbuds off, 
simply return them to the case.

The earbuds will go into hibernation mode if 
not used for 20 minutes. 

Quick Charge Feature

Get one more hour of playtime by nesting 
the earbuds in the charging case for ten 
minutes.

Checking the Battery Level

Your case carries enough power to charge 
your wireless earbuds 4 times for a total of 
25 hours. To check how much power your 
case still has, place the earbuds in the case.  
The LED on the front of the case will 
illuminate, indicating how much battery 
remains in the case:

If four lights illuminate, 75% or 
more remains

If three lights illuminate, between 
50-74% remains

If two lights illuminate, between 
25-49% remains 

If one light illuminates, less than 
24% remains. 

2x taps

Summary of Contents for Airtime Pro 2 SE











Reviews: