※
The specifications of any product may change without prior notice to improve performance.
4
2) AMD Sempron / AMD64 - Socket 754/939/940
①
①
Thermal Grease Application
Clear off any particles and residue from the top
of the CPU then spread the enclosed Thermal
Grease thinly on the surface of the CPU that
makes contact with the base of CNPS8000.
②
②
Clip Installation
Inter rock the pair of Clips for AMD 64 by sliding them into each other between the heatsink's base and fin.
Caution)
The arrowhead marking on each clip must be in line with the arrowhead markings on the heatsink's base.
③
③
Cooler Installation
Hook the hole of Clip-B onto the retention frame’s lug. Then hook the hole of Clip-A onto the retention
frame’s lug by pressing down on the lever of the Clip-A.
Note )
Set the direction of the Clips in a manner so that there is no interference with other components
of the motherboard.
Uninstalling the Cooler
To uninstall the CNPS8000, press onto the clip slot with the use of a (
-
) driver, then push off the
lever to disconnect the clip hole from the retention frame’s lug.
④
④
Power Connection (FAN MATE2 Installation)
Please refer to FAN MATE 2 Installation and Usage on page 5.
Clip-A for AMD64
Base
Clip-B for AMD64
Lever
Lug
Clip slot
Thermal Grease
CPU(Lid)
