※
The specifications of any product may change without prior notice to improve performance.
5
②
②
Installation of Clip Supports for Socket 478
Install the clip supports for socket 478 on both sides
of the retention guide as shown in the diagram.
③
③
Installation of Grips and Bolts
Interlock the L-type grips with the clip. Insert the two bolts
into the inner holes of the grips.
④
④
FHS Placement
Set the FHS at the center of the CPU. Screw the bolts
in slightly, and then tighten each bolt a few turns at a
time while alternating between the two until the Grips
are completely pressed against the Clip Support.
Retention Guide
Clip Support for Socket 478
⑤
⑤
Connect Power (Use FAN MATE 2)
◆
Please refer to FAN MATE 2 Installation and Usage on page 7.
Bolt
Grip (L-Type)
Inner Hole
Grip (L-Type)
Clip Support for
Socket 478
2) Intel Pentium 4 - Socket 478
①
①
Thermal Grease Application
Clear off particles and residue from the top of the
CPU then spread a thin layer of the included thermal
grease thoroughly on top of the CPU.
CPU (IHS)
Thermal Grease
All manuals and user guides at all-guides.com
all-guides.com
