※
The specifications of any product may change without prior notice to improve performance.
4
⑤
⑤
Connect Power (Use FAN MATE 2)
◆
Please refer to FAN MATE 2 installation and usage on page 7.
1) Intel Dual Core Pentium / Pentium 4 - Socket 775
①
①
Install Clip
Refer to “How to Install the CNPS9500’s Clip” on page 3 to correctly install the clip (S-Type,
⑫
) on
CNPS9500.
②
②
Install Clip Support
Align the clip support for Socket 775 (
⑭
) and the backplate for Socket 775 (
⑮
) with the mounting
holes on the motherboard and fasten them together using the clip support fixing bolts (
⑬
).
The lever slot on the clip support (
⑭
) should be properly oriented on the hinged side of the socket
lever when installing.
※
The backplate support on the backplate for Socket 775 (
⑮
) can be removed if deemed unnecessary.
③
③
Apply Thermal Grease
Clean off particles and residue from the top of
the CPU. Then spread the included thermal
grease (
②
) thinly on top of the CPU.
CPU
CPU
CPU
CPU
CPU
CPU
※
Caution
When installing CNPS9500 on a motherboard with horizontally-oriented
retention guide, take extra care not to let the screwdriver exert excessive
force on the fan.
If excessive force is exerted on the fan, it may cause a malfunction.
Clip Support Fixing Bolt,
⑬
Clip Support for Socket 775,
⑭
Motherboard
Backplate for Socket 775,
⑮
Backplate Support
Socket Lever Hinge
Socket Lever
Socket Slot
CPU
CPU
④
④
Place Cooler
Insert two bolts (
⑧
) into holes on the clip (S-Type,
⑥
) and place
CNPS9500 at the center of the CPU. Fasten the bolts slightly at
first. Then, fasten the bolts in an alternating manner until the clip
(
⑥
) is completely pressed against the clip supports.
Bolt,
⑧
Clip(S-Type),
⑥
CPU (IHS)
Thermal Grease
All manuals and user guides at all-guides.com
