※
The specifications of any product may change without prior notice to improve performance.
6
⑤
⑤
Connect Power (Use FAN MATE 2)
◆
Please refer to FAN MATE 2 installation and usage on page 7.
3) AMD Sempron/AMD64 - Socket 754/939/940
※
When CNPS9500 is installed on an AMD system, the existing cooler installation framework (retention
frame, backplate, screws) is used for the installation.
①
①
Install Clip
Refer to “How to Install the CNPS9500’s Clip” on page 3 to correctly install the clip (L-Type,
⑦
) on
CNPS9500.
②
②
Separate Retention Frame Fixing Screws
Unscrew the screws that fix the existing retention frame onto its place.
③
③
Apply Thermal Grease
Clean off particles and residue from the top
of the CPU. Then spread the included thermal
grease (
⑦
) thinly on top of the CPU.
④
④
Place Cooler
Place CNPS9500 at the center of the CPU. Fasten the retention
frame fixing screws onto the backplate through the outer holes
of the clip (L-type,
⑦
) slightly at first. Then, fasten the screws in
an alternating manner until the clip (
⑦
)
is completely pressed against the
retention frame.
※
When installing CNPS9500 on a motherboard with horizontally-oriented
retention guide, take extra care not to let the screwdriver exert excessive
force on the fan.
If excessive force is exerted on the fan, it may cause a malfunction.
◈
Motherboards with Pushpin - type Retention Frame need the included
nipples (
⒃
) and bolts (
⑧
) for installation of the cooler.
Remove the push-pins from the retention frame, and insert the nipples
(
⒃
) into it. Fasten them to the backplate using the bolts (
⑧
) and follow
these steps in order :
③
Apply Thermal Grease
④
Place Cooler
Screw
Clip(L-Type),
Bolt,
Nipple,
Bolt,
Retention Frame
CPU (Lid)
Thermal Grease
All manuals and user guides at all-guides.com
